DIY Mini Wheelbarrow Decor Using Paper

Have tons of used paper at home? Repurpose them and make them into these adorable DIY mini wheelbarrow decor pieces. Learn how to make them through this tutorial by Bir Parça Kağıt.

Materials:

• paper
• gluestick
• scissors
• 0.2-inch diameter stick
• round object with a 1.6-inch diameter
• thin stick
• pasteboard
• acrylic paint
• flowers

[social_warfare buttons=”facebook,pinterest,twitter,whatsapp”]

Instructions:

Step 1:

Cut papers in half lengthwise. Get one and roll it on the stick. Glue the ends using the glue stick. Once done, flatten it. Repeat three more times.

Step 2:

Wrap the flattened paper strips around the round object, gluing each layer until it becomes a thick ring.

Step 3:

Get one of the papers that you cut earlier and roll it on the thin stick. Glue it on the end. Cut 2 pieces of 1.6-inch rolls. Glue them on the inside of the ring in the form of a cross to make the wheel.

Step 4:

Get a whole piece of paper and roll it on the o. 2-inch stick. Glue the ends to secure. Repeat several times. Cut 2 pieces of 1.96-inch rolls, 2 pieces of 9.44-inch rolls, 14 pieces of 3.54-inch rolls, and 14 pieces of 5.12-inch rolls.

Step 5:

Glue 7 pieces of 5.12-inch rolls together. Measure 0.8 inches from the bottom edge of the roll and mark it. Place a ruler on the top edge on the same side then onto the mark. Draw a diagonal line, then cut it out. Repeat to make another one.

Step 6:

Glue 7 pieces of 3.54-inch rolls together. Repeat with the remaining 7.

Step 7:

Glue the pieces from steps 7 and 8 to make the tray. Next, cover the bottom with the pasteboard.

Step 8:

Get half of a piece of paper and fold it several times to make a strip. Open one of the folds and use it to cover the edges of the tray.

Step 9:

Paint the tray and other pieces. Let them dry completely, then assemble and glue them.

Step 10:

Place the flowers inside the tray.

DIY Mini Wheelbarrow Decor Using Paper