DIY Waterproof LED Outdoor Stone Light
Image by shaah crafts via Youtube
Who knew you could make this DIY waterproof LED outdoor stone light using PVC pipes and a plastic bottle? This amazing idea is by shaah crafts on Youtube. Place it on your pathway or garden for a beautiful view at night! Watch the video below for full instructions.
Materials:
- plastic bottle (diameter must be greater than the pipe)
- PVC pipe
- small PVC pipe
- blade
- heat gun
- super glue
- paper
- tape
- cutter
- sandpaper
- hot glue
- white paint
- painter’s tape
- C PVC cement
- sand
- LED strip light
[social_warfare buttons=”facebook,pinterest,twitter,whatsapp”]
Instructions:
Step 1:
Cut a PVC pipe based on how long you want the bottom part to be.
Step 2:
Cut the straight part of the bottle and place it inside the PVC pipe you cut earlier. Heat it with a heat gun until it flattens and gets the shape of the pipe. Once done, remove it from the pipe.
Step 3:
Cut another small PVC pipe for the top part. Insert half an inch or less of the plastic into the bottom pipe, then use super glue to hold it in place. Do the same for the top.
Step 4:
Trace the diameter of the pipe on the paper. Wrap it around another PVC pipe, then cut it.
Step 5:
Get the cut-out circle and flatten it using a heat gun. Sand the sides to smoothen.
Step 6:
Cut a small PVC pipe(smaller diameter) and glue it on the flattened circle. This is for the top part.
Step 7:
Spray paint the plastic part inside. Glue the top onto the body.
Step 8:
Apply C PVC on everything except the plastic part, then sprinkle with sand.
Step 9:
Get the tube with a smaller diameter and cut the same size as the body of the light. Make a hole at the upper part and wrap the LED strip around with the wire for the battery inserted in the hole. Once done, place it inside the body.
