Super Easy DIY Water Fountain Using Terracotta Saucers

Want to see more birds in your garden or front yard? Placing this water fountain may be the trick! This project by DIY stories is super easy to make and only requires terracotta saucers and vases that you can easily find at stores. I am sure you’ll appreciate this too, not just the birds! Nothing is more calming than hearing the sounds of flowing water. Read on or watch the video below for full instructions.

Materials:

• 24-inch clay saucer
• 10-inch and 14-inch clay saucers
• 8-inch and 12-inch height clay vases
• water pump
• flexible hose pipe
• fountainhead set
• PVC pipe
• water pipe tape
• silicone waterproof sealant

[social_warfare buttons=”facebook,pinterest,twitter,whatsapp”]

Instructions:

Step 1

Get the 8-inch and 14-inch clay saucers and make a hole in the center of each one. The holes should measure as the PVC pipe.

Step 2

Get the 24-inch clay saucer and 12-inch clay vase. Make a hole at the bottom side of the 12-inch clay vase as big as the pipe. Insert the PVC pipe into the hole, then into the 14-inch clay saucer. Be sure that it’s centered.

Step 3

Make a hole in the bottom of the 8-inch clay vase, then insert the PVC pipe. Next, place the 10-inch clay saucer on top.

Step 4

Get the fountain top and place it on the tube. Tape it in place and make sure that it’s standing upright. Fill the hole with silicone waterproof sealant. Be sure to spread it properly, leaving no gaps to avoid any leaks. Let it dry completely.

Step 5

Cut excess PVC pipe on the bottom using scissors then connect the water pump. Secure them with tape.

Step 6

Fill the bottom saucer with water, then you can already plug in the water pump. Now you have a water fountain. Place it in your garden or front yard.

Super Easy DIY Water Fountain Using Terracotta Saucers