How To Lubricate A Sliding Glass Door

If you have a sliding door that makes a lot of noise, all it needs is some cleaning and relubrication. Andy Barkin on YouTube shows how to easily clean them so it’s easier to slide. There are 2 different ways to lubricate the door and one other way can be complicated than the other such as having an extra hand because the door might be heavy. This tip is very clever and simple, and I think it’s helpful that he shows the mechanism up close. He takes the time to thoroughly explain the instructions.

Materials:

• lubricant spray oil
• Phillips screwdriver
• rag
• vacuum, optional

Directions:

First, if you just want to lubricate the doors, there’s usually a little hole at the ends or on the side of the bottom door. Take the oil and spray it right in there which will help lubricate the door. However, the best way is to remove the door. Continue to watch Andy Barkin tutorial on YouTube for full instructions and details.

[social_warfare]

Next, if you decide to remove your door, clean the sliding door tracks by wiping it down or vacuuming the dirt. Add the door back and lubricate the latch mechanism as well, and it should be good to go.

Overall, this is a great tip to keep in mind if your sliding door makes a loud squeaky or screechy noise. Although he uses a specific oil spray, I think there are many brands at the store that you may buy. I know this tip will come in handy because if you have a sliding door that is often used, it will get rusted and hard to slide over time. There are no special products needed for this cleaning tip which is the best.