DIY No-Sew Grommet Curtains Tutorial

Are you looking for an easy way to sew a curtain? Look no more, as this project from OnlineFabricStore on Youtube is just perfect for you! It’s a no-sew project, so even if you don’t have any experience in sewing, you’ll definitely be able to pull this off. Watch the video tutorial below to learn how to make this.

Materials:

• drapery fabric
• ruler
• grommet tape
• grommets
• fusible bonding web
• pins
• scissors
• sewing gauge (optional)
• fabric marker
• iron

Directions:

Step 1

To determine the size to cut your fabric, take the dimensions you want your curtain panel to be, and add 4 inches to the width and 16 inches to the height to account for the hems. Cut the fabric 40 inches wide by 64 inches high. Next, to figure out what the total width of your curtain should be, multiply the width of the window by one and a half or two, depending on how full you want the curtains to look. After this, hem the two sides of the panel, fold the edge over 1 inch, and press, then fold it over another inch and press it again. Now, take the fusible bonding web and slide it under the fold. With your iron on a high steam setting, hold it on the seam for about 10 seconds to melt the bonding web. Then, lift the iron and place it on the next section.

[social_warfare]

Step 2

Next, flip the panel over and slowly iron down the other side. Repeat for the other side of the panel. For the top hem, fold the fabric over 4 inches and iron, then fold it over another 4 inches and press again. After this, slip the bonding web under the edges of the fabric and iron. Repeat for the bottom hem. Now, attach the grommets. Cut the grommet tape to the width of the panel making sure the grommets are centered. Next, place the tape on the back side of the top hem and pin it, then trace around the insides of all the circles. After this, take the grommet tape off and cut out the circles. Finally, line up the tape with the holes and attach the grommets to the front.

DIY No-Sew Grommet Curtains Tutorial