DIY Macrame Tumbler Bottle Holder

Tumblers have gained popularity over the years. They come in different colors, shapes, and sizes. Unlike before, most tumblers nowadays come with a handle, so you can bring it everywhere without worrying it may slip from your hands. But if you want the handle to be longer than usual, this DIY macrame tumbler bottle holder by 공S 꼼지락 kongs kkomjirak is a great solution.

RELATED: Easy DIY Macrame Basket Using a Paint Bucket

Aren’t these bags lovely? They are definitely boho, which is perfect for spring and summer seasons with your colorful outfits. It is easy to make and not as hard as it looks. You can make them in different colors and sizes depending on the size of your bottle. You can also make the handle longer if you want to. For detailed instructions, watch the video below.

Here’s another macrame project for you: Easy Macrame Rainbow Tutorial

DIY Macrame Bottle Holder Materials

• 4 pieces of string rope 0.2 inch in diameter and 78.7 inches long
• 1 piece of string rope 0.2 inch in diameter and 51.12 inches long

How to Make a Macrame Water Bottle Holder

Step 1:

Take your bottle and 4 pieces of string. Place your bottle upside down. Place the center of the strings on top of the bottle. Tape the top part in place. Make one square knot in the middle.

Step 2:

Remove the tape and group the strings into pairs placing them in the middle on each side. Tape the top part in place again.

Step 3:

Make the reef knot on the bottom edge of the water bottle on all pairs. Reef knot is a way to square knot using only two working codes without filler codes.

Step 4:

Make the second layer of knots. Make each knot 1.2 cm to 1.6 cm apart. Repeat for the next layers until you reach the top part of your bottle.

Step 5:

Make the handle. Make a knot by holding one thread long so that the two threads can converge. Next, make 6 square square knots with two pairs. Do the same for the other side.

Step 6:

Gather all the threads together, then do a wrapping knot. Wrapping knot with 51.2 inch thread. Cut the excess.

DIY Macrame Tumbler Bottle Holder