Star Pot Holder With Free Pattern

This star pot holder is a great project by GettingLoosey for this festive month. It’s so easy to make, as it comes with a free downloadable pattern! No need to do measurements which saves you a lot of time. Give these lovely pot holders as gifts for people who love to cook or bake – I am sure they will find them useful. Watch the video below for full instructions.

Materials:

• 12″ x 24″ fabric
• 12″ x 24″ contrast fabric
• 12″ x 22″ heat-resistant inlay
• pattern (download it here)

[social_warfare buttons=”facebook,pinterest,twitter,whatsapp”]

Instructions:

Step 1:

Print the pattern. Once you have the pattern, cut the fabrics. The number of cutouts you need is indicated on the pattern.

Step 2:

Put the parts together – alternating the first fabric and the contrast fabric. The remaining six parts are for the second side.

Step 3:

Take one piece of each fabric, then place them right sides together. To make it easier for you to where the seam should stop, mark the seam lines and make a straight line on the intersection. Sew on one side of the longer diagonal. Do the same for the remaining diamonds until you reach where you first started.

Step 4:

Press all seams in the same direction. For the middle, open it and press. Adjust the seams if it doesn’t lay flat.

Step 5:

Place the heat resistance inlay on the bottom of the star. Stitch in the ditch. Take your time so you don’t drift to the left or right. Once done, trim off the excess inlay. Repeat the same process from steps 3 to 4 for the back part.

Step 6:

Fold the loop in half lengthwise and iron to make a crease. Next, fold the edges up into the middle, then iron again. After that, fold it in half again. Top stitch it along both edges. Fold it in half and place the ends on one of the diagonal edges with the fold on the inside. Sew within the seam allowance.

Step 7:

Place the backside on top of the first one right sides together. Align them, and mark an opening. Sew except for the opening. Trim off the tips just below the stitches, then cut small triangles on the corners. Flip it right side out, flatten and sew the opening. Lastly, top stitch the edges.

Star Pot Holder With Free Pattern