Magic Bow Hair DIY

If you are always on the go but want your hair to look neat and beautiful all the time, use this lovely accessory. You just need to insert your hair in the middle, then twist it to make a bow. It’s a simple fashion accessory that works really well when you’re in a rush. Learn how to make this magic bow hair DIY through this wonderful tutorial by Estadistica Datos del Mundo on Youtube.

Materials:

• 2 pieces of 4.72 in x 14.96 in rectangular fabric
• pliers
• 37.5 – 38.58 in aluminum wire (7.09 inch)

[social_warfare buttons=”Facebook,Pinterest,Twitter,WhatsApp”]

Instructions:

Step 1:

Place the two rectangular fabrics right sides together. Fold the top fabric in half to make a crease.

Step 2:

Mark a line on the crease. Measure 4.53 in from both ends, then mark with a pencil.  From the two points, mark 0.20 inches up and down from the center line. Next, trace the lines. Measure 0.98 inches from both ends, then mark. Draw a round corner on both sides.

Step 3:

Sew it leaving an opening at the bottom.

Step 4:

Once done sewing, fold it in half crosswise, then cut along the center line. Make small cuts on the rounded corners. Flip the fabric to the other side and align the seam. Once done, finger-press the seams open.

Step 5:

Roll up and join the top and bottom parts. Sew with a 0.2 inches seam allowance. Flip the fabric right side out. Do the same for the other side. Fold at the seam and secure with pins. Sew the end with a 0.4-in seam allowance. Repeat on the other side.

Step 6:

Turn the fabric right side out. Push the corners using a stick, then press with an iron.

Step 7:

Mark a 1.97-in for the gap in the open part, then sew around with a 0.4-in seam allowance.

Step 8:

Fold the ends of the aluminum wire using pliers. Insert in the opening from the center, then form a rectangle following the edges of the fabric. Sew the opening on top and in the middle.

Magic Bow Hair DIY