Easy To Sew Fitted Tablecloth

Easy To Sew Fitted Tablecloth | DIY Joy Projects and Crafts Ideas

Image Credit: Amaryllis via YouTube


Here’s how you can easily sew a fitted tablecloth with a few simple instructions! All you need is your basic sewing tools and this video tutorial by Amaryllis on YouTube. This sewing project is perfect even for beginners because it’s not that complicated and can be done in just under a few minutes. You can make a lot of tablecloths so that you can have a lot to choose from, you can also give them a gift or even sell them. The finished product looks absolutely pretty as well! Proceed to read down below for the full instructions, then watch the video tutorial as well.



  • Oilcloth or laminated cotton
  • Masking tape
  • Pins
  • Scissors
  • Matching thread
  • Sewing machine


Step 1

To calculate the yardage of fabrics, you will need to measure the tabletop and add 8 inches in length and 8 inches in width.  Place the fabric on the table with its wrong side up, then align the width and length of the fabric with the table low edge, and tape to hold it in place. Cut the two other sides of the fabric following the table low edge. Once all the extra fabric is trimmed, tape it around in place, so the fabric doesn’t slip.

How To Sew Fitted Tablecloth
Image Credit: Amaryllis via YouTube

Step 2

Carefully pin the 4 corners of the fabric, then place the pins vertical and close enough to the table corner. Remove the fabric off the table and sew the edges as you remove the pins. Cut the extra fabric within ¼ inches from the seam. Trim the fabric to have the bottoms aligned if needed. Repeat previous steps to sew all four corners.

Fitted Tablecloth Sewing Tutorial
Image Credit: Amaryllis via YouTube


*Thanks to Amaryllis via YouTube for all images used here. If you loved this sewing project, then you’ll surely love her other videos too, so give her channel a visit and subscribe!

Easy To Sew Fitted Tablecloth

Don’t Miss Out! Sign up for the Latest Updates